|
|
|
4x1 DVI DL KVM Switch von Gefen |
Umschalter für DVI, USB 2.0 und Audio |
| |
| |
|
|
|
• Preisliste zusenden
• Anfrage |
| |
Switch Dual Link DVI and USB 2.0 between Four Computers (PC or Mac)
Gorgeous, super high resolution video switching supplied with the DVI DL Switcher
The 4x1 DVI DL DVI Switcher allows you to easily switch between four cross-platform dual link DVI computers using just one dual link DVI display, USB 2.0 keyboard and mouse. Dual link DVI uses all 24 pins of the DVI connector to achieve ultra high video resolutions up to 3840x2400. USB 2.0 is the next generation of USB, capable of sending data significantly quicker than before. Video and control signals are "switched" for each computer upon selection using Discrete IR Remote and either Discrete Contact Closure (RMT-4) or Serial RS-232, providing you with an easy and effective method of accessing two computers from one workstation without the hassle of networking.
*Wired switching is also available via Serial RS-232
How it works
You simply connect your dual link DVI display and USB 2.0 keyboard/mouse to the Switcher's outputs. Then you connect your computers' dual link DVI and USB ports to the Switcher's inputs using the supplied cables. From there, you select the computer you want using the IR remote that comes with the unit or with any RS-232 remote control. It allows you to swtich seemlessly between Macintosh or PC keyboard/video/mouse combinations.
Package Includes:
* 4x1 DVI DL Switcher
* RMT-4IR
* One 5V Power Supply
* Four 6ft Dual Link DVI cables
* Four 6ft USB 2.0 Cables
Features:
* Switches easily between any four dual link DVI computers with USB 2.0
* Maintains highest 3840 x 2400 resolution dual link video
* Saves you money on hardware costs
* Use either PC or Mac USB 2.0 keyboard/mouse
* Front panel switching
* Discrete IR remote (included)
* Contact closure remote control option (RMT-4)
* Parallel remote port (RMT-4 not included)
* Supports resolutions up to 1080p, 2K, and 3840 x 2400
* Supports DDWG standards for DVI monitors
* Rackmountable
Specifications:
* Video Amplifier Bandwidth: 2 x 1.65 Gbps
* Input Video Signal: 1.2 volts p-p
* Input DDC Signal: 5 volts p-p (TTL)
* Dual Link Range: 3840 x 2400
* DVI Connector: DVI-I 29 pin female (digital only)
* Audio Connector: mini-phone stereo 3.5mm
* USB 2.0 Input Connection: Type "B"
* USB 2.0 Output Connection: Type "A"
* Power Supply: 5V DC
* Power Consumption: 20 watts (max)
* Dimensions: 17" W x 1.75" H x 4.375" D
* Rackmountable: 1U Rack Space
* Shipping Weight: 8 lbs. |
|
|
|
|
| BellEquip Suche |
|
|
| Ansprechperson |
DANKE dass SIE uns besuchen.
Jürgen Binder
Beratung & Verkauf
HIER finden Sie meinen
Kompetenzbereich
juergen.binder[a]bellequip.at
Tel: +43 (0) 2822 33 33 993
Mobil: +43 (0) 664 33 33 993
BellEquip Zentrale:
Tel: +43 (0) 2822 33 33 990
Fax: +43 (0) 2822 33 33 995
info[a]bellequip.at
  
KVM Switches
Matrix Switches
KVM Extender
DVI Extender
USB 2.0 Extender
KVM over IP
DVI over IP
KVM, DVI, VGA, HDMI
DisplayPort, 3G-SDI, HD-SDI, SD-SDI
Video, Audio, USB, RS232
Digital Signage
Scaler
Konverter
Glasfaser Übertragungssysteme
Monitorhalterungen
|
| Kompetenzbereiche |
DI(FH) Günther Lugauer
Rack Monitoring
Serverraum Überwachung
Temperaturüberwachung
SNMP, E-Mail und SMS
Remote I/O
Wireless Communication
GSM GPRS EDGE UMTS HSDPA HSUPA HSPA+ VPN Router
Industrielle Fernwartung
SNMP Energiemonitoring
RS232 / RS422 / RS485 / USB over IP
Medienkonverter
Industrielle Netzwerkswitches
Audio over IP
Ing. Gregor Schuller
USV Anlagen - UPS Systems
USV Batterien / Akkus
USV Service und Software
Serverschränke, Netzwerkschränke
Remote Power Management
Zutrittssysteme
CATx und LWL Kabel
Passive Netzwerktechnik
Jürgen Binder
VGA, DVI, HDMI, DisplayPort
KVM Switches
KVM Extender
KVM over IP
DVI KVM Extender
USB 2.0 Extender
Matrix Switches
Digital Signage
Konverter
|
| Wir empfehlen |
Hörbücher von Robert Betz
zu den Themen
ERFOLG und FÜLLE
|
|
