|
|
| |
| Adderlink
AV - AUDIO VIDEO EXTENDER / SPLITTER |
| AUDIO VIDEO
DISTRIBUTION / VERTEILER / VERTEILUNG / Digital Signage |
| |
|
|
|
• Preisliste zusenden
• Anfrage |
| |
AdderLink AV Series
High-resolution video and superb quality audio distribution
for Digital Signage and Media Streaming applications.
The AdderLink AV Series is a range of audiovisual extenders
delivering high video resolutions and superb quality audio up to
300m using standard CATx cable (x=5,5e,6,7). The innovative design
allows for flexible audiovisual distribution that can be expanded
to grow in line with project developments.
The AdderLink AV range of audiovisual extenders allow for the real
time delivery of high quality multimedia content over long distances.
Using the AdderLink AV avoids the prohibitive costs of fibre optic
cabling, displays with built in CPUs or locating a CPU next to each
screen. Allowing for the creation of flexible distribution architectures,
the AdderLink AV ensures direct delivery of crystal clear communication
with consumers at the point of decision.
Consisting of 4 interchangeable units, the AdderLink
AV Series makes the design of digital signage and narrow casting
applications cost effective, flexible and easy to plan.
AdderLink AV Series features;
• Extends video and audio across a single CATx
cable
• Extra fine video quality at resolutions up to 1600 x 1200
at 200m and 1280 x 1024 at 300m
• High fidelity clickless digital audio (16bit, 44.1 kHz,
stereo)
• Fine, independent sharpness and brightness control
• DDC support
• Integrated state of the art 300MHz DeSkew with 62ns full
scale & 2ns granularity (AV101R only)
• Feed through / cascade port at transmitter
• Dual video and audio outputs at receiver
• Use stand alone or rack mount 16 modules across 3U
• Advanced spike suppression circuits for reliability in ‘noisy’
installations
• All metal construction
• Power / video indication confirm correct operation
AdderLink AV 100T transmitter and AdderLink AV100R
• Sold individually or as a pair (AdderLink AV
100P)
• Extends high resolution video and high fidelity audio up
to 300m
• Local port on transmitter to connect local screen and speakers
or for cascading other AdderLink AV 100T transmitter units
• AdderLink AV 100R duplicates input from transmitter allowing
for 2 video and 2 audio outputs
• Can be used as a receiver up to 300m from AdderLink AV 100T
or AdderLink AV 104T transmitters |
| |
|
| |
AdderLink
AV 104T transmitter
• Extends a single
high resolution video and high fidelity audio signal to 4 different
receivers
• Local port to connect local screen and speakers or to cascade
to other AdderLink AV 104T transmitter units
AdderLink AV 101R receiver unit
• Duplicates input from transmitter allowing
for 2 video and 2 audio outputs
• Integrated skew adjustment allowing the receiver to be located
further from the transmitter and/or cope with higher video resolutions
• Can be used as a receiver up to 300m from AdderLink AV 100T
or AdderLink AV 104T transmitters
• Has local cascade port allowing for other receivers to be
cascaded from the original receiver |
| |
|
| |
TECHNICAL
SPECIFICATIONS
Video Resolutions - 1600 x 1280
at distances up to 200 metres/650 feet, 1280 x 1024 at distances
up to 300 metres/1000 feet.
Extension distance - Up to 300 meters/1000 feet using CATx (x=5,5e,6,7).
Extension technology - Differential analogue signalling
for video signals.
Cable Equalisation - Finely adjustable cable equalisation
amplifiers enable the video sharpness and brightness to be independently
adjusted using the dials on the side of the receiver units.
Integral DeSkew (AdderLink AV101R only) – Skew
compensation adjustments can be made using the two rotary dials
on the AdderLink AV101R receiver unit. The first dial affects the
relationship between green and blue colour signals, the second red
and green. The cable skew is produced due to wire length differences
between different twisted pairs in a CATx cable that arise due to
the different twist rates used to reduce signalling cross talk.
The amount of cable skew seen depends on the cable type used and
the cable length. The AdderLink AV101R provides up to 62ns of DeSkew
with a fine 2ns resolution. This means that high-resolution video
can be accurately DeSkewed even at long cable distances. The DeSkew
supports 300MHz bandwidths, which means that the DeSkew function
does not adversely affect the video quality.
Indicators - The remote and local units are fitted
with two indicators; red shows the presence of power into the module,
green indicates the presence of a video input.
Audio - Transmitted as digital signals to ensure high
fidelity and low noise levels. Phase locked sampling clocks ensure
that there are no unwanted clicks when no sound is being played.
Rack mount options – Both the local (computer-end)
and remote (display-end) units may be rack mounted in the AdderLink
AV Series rack mount chassis. The chassis enable 16 units to be
mounted in 3U of 19-inch rack space. The units are rack mounted
using the optional rack mount faceplate.
Connectors (AdderLink AV 100T) -1 x blue 15-pin high-density
D-type female connector for video input and 1 x light green 3.5mm
audio jack for audio input. 1 x blue 15-pin high-density D-type
female connector for video output and 1 x light green 3.5mm audio
jack for audio output or cascade to additional AdderLink AV 100T.
1 x RJ45 connector for CATx cable connection. 2.5mm DC jack for
power adapter.
Connectors (AdderLink AV 100R) - 2 x blue 15-pin high-density D-type
female connector for video output and 2 x light green 3.5mm audio
jack for audio output. 1 x RJ45 connector for CATx cable connection.
2.5mm DC jack for power adapter.
Connectors (AdderLink AV 104T) - 1 x blue 15-pin high-density
D-type female connector for video input and 1 x light green 3.5mm
audio jack for audio input. 1 x blue 15-pin high-density D-type
female connector for video output and 1 x light green 3.5mm audio
jack for audio output or cascade to additional AdderLink AV 104T.
4 x RJ45 connectors for CATx cable connections. 2.5mm DC jack for
power adapter.
Connectors (AdderLink AV 101R) - 2 x blue 15-pin high-density
D-type female connector for video output and 2 x light green 3.5mm
audio jack for audio output. 1 x RJ45 connector for CATx cable connection
from local unit and 1 X RJ45 connector for CATx cable connection
to cascade to additional AdderLink AV 101R receiver units. 2.5mm
DC jack for power adapter.
Physical (All AdderLink AV units) – Metal case
(steel and stainless steel), 98mm x 95mm x 25mm.
Power – All AdderLink AV units are powered by
an external 5V DC, 2A power supply with IEC power cable connection.
A country specific power cord is provided. Alternatively 4 units
can be powered using a 4amp power supply and the Adder “Squid”
cable.
Spike suppression – All AdderLink AV units are
fitted with spike suppression circuits.
Display Data Channel – DDC signalling is supported
to enable the computer to communicate with the local monitor and
thus configure its video card for optimal operation.
Package contents – All AdderLink AV Series come
with the necessary IEC style power supply and power cord, safety
and installation leaflet, CD manual, stick on rubber feet. (Note:
the rack panels are not included and need to be purchased separately
as required).
Optional accessories – ALAV - Series rack mount
chassis (part code: ALAV-RMK-CHASSIS), rack mount plate for local/remote
unit (part codes: ALAV-RMK-FACIA). Adder 4amp power supply and “squid”
cable to power 4 ALAV units (part code ALAV-PDM-KIT).
Approvals - FCC class A, CE marked.
Power – Operating Voltage: 100-240VAC
Power Frequency: 50-60Hz
Usage: 5VDC at 500mA.
Temperature Tolerance – 0-40°C (32 to 104°F).
Humidity Tolerance – 5 to 60% non-condensing. |
| |
|
| BellEquip Suche |
|
|
| Ansprechperson |
DANKE dass SIE uns besuchen.
Jürgen Binder
Beratung & Verkauf
HIER finden Sie meinen
Kompetenzbereich
juergen.binder[a]bellequip.at
Tel: +43 (0) 2822 33 33 993
Mobil: +43 (0) 664 33 33 993
BellEquip Zentrale:
Tel: +43 (0) 2822 33 33 990
Fax: +43 (0) 2822 33 33 995
info[a]bellequip.at
  
KVM Switches
Matrix Switches
KVM Extender
DVI Extender
USB 2.0 Extender
KVM over IP
DVI over IP
KVM, DVI, VGA, HDMI
DisplayPort, 3G-SDI, HD-SDI, SD-SDI
Video, Audio, USB, RS232
Digital Signage
Scaler
Konverter
Glasfaser Übertragungssysteme
Monitorhalterungen
|
| Kompetenzbereiche |
DI(FH) Günther Lugauer
Rack Monitoring
Serverraum Überwachung
Temperaturüberwachung
SNMP, E-Mail und SMS
Remote I/O
Wireless Communication
GSM GPRS EDGE UMTS HSDPA HSUPA HSPA+ VPN Router
Industrielle Fernwartung
SNMP Energiemonitoring
RS232 / RS422 / RS485 / USB over IP
Medienkonverter
Industrielle Netzwerkswitches
Audio over IP
Ing. Gregor Schuller
USV Anlagen - UPS Systems
USV Batterien / Akkus
USV Service und Software
Serverschränke, Netzwerkschränke
Remote Power Management
Zutrittssysteme
CATx und LWL Kabel
Passive Netzwerktechnik
Jürgen Binder
VGA, DVI, HDMI, DisplayPort
KVM Switches
KVM Extender
KVM over IP
DVI KVM Extender
USB 2.0 Extender
Matrix Switches
Digital Signage
Konverter
|
| Wir empfehlen |
Hörbücher von Robert Betz
zu den Themen
ERFOLG und FÜLLE
|
|
