Temperatur Sensor (Temperatursensor) für Rack und Remote Monitoring Lösungen - Temperatur Sensoren (Temperatursensoren)

BellEquip GmbH
 
Temperatur Sensor ( Temperatursensor)
 
• Preisliste zusenden • Anfrage
 
Temperature Sensors

The AKCP Temperature sensors are of the semiconductor, microprocessor controlled type, designed to record accurate temperature data. It is compatible with all AKCP sensorProbes.

You can plug in up to 2 temperature sensors on the sensorProbe2 and up to 8 on sensorProbe8, sensorProbe8-X20/X60 and cameraProbe8. All temperature sensors come with an RJ-45 male connector and can be easily plugged in to the RJ-45 jacks on the sensorProbe. Specially designed CAT 5 cable assures a correct reading up to 100 feet, and is available in standard length of 1 foot, 15 feet, 60 feet and 100 feet, allowing the sensors to be positioned in hot spots. These temperature sensors can be extended beyond their standard length. In some cases they can be extended up to 1,000 feet.

The sensorProbe auto detects the presence of the temperature sensor once plugged into the RJ-45 port. A built in graph option is included on all sensorProbes for graphing temperature variations over a period of time.
Each temperature sensor has its own SNMP OID so that the data can be collected over network and graphed using external application like MRTG.

The temperature sensor can be read using included SNMP utilities to allow graphing and data logging at 0.5°C resolution.

Specifications & Features:

Never needs Calibration
Measurement range Celsius:-55°C to +75°C.
Measurement resolution Celsius: 1°C increments.
Measurement accuracy Celsius: ±0.5°C accuracy from -10°C to +75°C.
Measurement range Fahrenheit: -67°F to +167°F.
Measurement resolution Fahrenheit: 1°F increments.
Measurement accuracy Fahrenheit: ±0.9°F accuracy from +14°F to +167°F.
Communications cable: RJ-45 jack to temperature sensor using UTP CAT 5 wire.
Sensor type: semiconductor microprocessor controlled.
Power source: powered by the sensorProbe. No additional power needed.
sensorProbe autodetects the presence of the temperature sensor.
Measurement rate: one reading every second.
Up to 2 temperature sensors per sensorProbe2, 8 per sensorProbe8 and cameraProbe8.
Full autosense including disconnect alarm.

Keywords:

Rack Monitoring, Server, Serverraum, Überwachung Temperatur, Luftfeuchtigkeit, Wasser, Rauch, Feuer, Sicherheit, Security, Bewegung, AC Spannung, DC Spannung, Potentialfreie Kontakte, Power Board, sensorprobe2, sensorprobe8, cameraprobe2, sensorprobe2dc, sensorprobe8-x20, sensorprobe8-x60, sensorprobe, cameraprobe, sensorprobe8l, sensorprobe8l-x20, sensorprobe8l-x60, Web, SNMP, SMS, TCP/IP, Server, Server Raum, Data Center, Serverschrank, Serverschränke, Netzwerkschrank, Netzwerkschränke, Temperatursensor, Luftfeuchtigkeitssensor, Wassersensor, Rauch Detektor, Feuersensor, Sicherheit, Security, Bewegungmelder, AC Spannung, DC Spannung, SNMP Traps, E-Mail, SMS, MMS, Alarm Sound, Telefon Anfruf, Sprachmitteilung, FTP, Kundenscript, Script, Umgebungsüberwachung, Umgebungs-Überwachung
BellEquip GmbH • Franz Eigl-Straße 8 • 3910 Zwettl • Österreich / Austria • Tel.: +43 (0)2822 33 33 990 • Fax: +43 (0)2822 33 33 995
Internet: www.bellequip.at • E-Mail: info[a]bellequip.at