|
|
|
PN9108 8 Port Power over the NET Altusen |
Remote Power Management |
| |
|
| |
| • Preisliste zusenden
• Anfrage |
| |
8 Port Power over the NET™
The PN9108 Power over the NET™ is a control unit that provides remote power management for eight AC outlets via a TCP/IP connection, allowing administrators to control the power off, power on, and reboot status for each attached device from any computer connected to the Internet, whether down the hall, or half way around the world.
Features
Remote power on/off/reboot control for eight outlets via TCP/IP and a built in 10/100 Ethernet port.
Local power on/off/reboot control via the PN9108's RS-232 port to the computer's RS-232 port.
Daisy chain up to 15 additional stations to control up to 128 outlets.
Manual switching between Local and Remote access for each port via front panel push button switches.
Individual control of each port - users can set the power on sequence and delay time for each port to allow equipment to be turned on in the proper order.
Easy setup and operation via a browser interface.
Provides three configuration/management methods: Browser; Telnet; or Console Terminal.
Safe shutdown and rebooting for Windows systems*.
Overcurrent protection and recovery for each AC port (110 V model only) plus total port overcurrent protection (both models) - remote users can monitor the current status via the GUI interface on their browsers.
Separate circuits for the unit's power and the power to the devices – the power control status menu is still accessible even when an overload condition trips the devices'circuit breaker.
Cumulative load measurement - remote users can view load information in amperes via the GUI on their browsers.
On/Off scheduling - allows everything from a one-time start/shutdown, to daily, weekly, etc. starts/shutdowns at user-specified times.
Port grouping - perform the same action on a specified group of ports.
Out of Band (OOB) operation via terminal or dialup connection.
Two level (Administrator and User) security.
Detachable front panel for convenient rack mounting. |
| |
|
| |
|
|
| |
|
| |
|
| |
|
| BellEquip Suche |
|
|
| Ansprechperson |
DANKE dass SIE uns besuchen.
Jürgen Binder
Beratung & Verkauf
HIER finden Sie meinen
Kompetenzbereich
juergen.binder[a]bellequip.at
Tel: +43 (0) 2822 33 33 993
Mobil: +43 (0) 664 33 33 993
BellEquip Zentrale:
Tel: +43 (0) 2822 33 33 990
Fax: +43 (0) 2822 33 33 995
info[a]bellequip.at
  
KVM Switches
Matrix Switches
KVM Extender
DVI Extender
USB 2.0 Extender
KVM over IP
DVI over IP
KVM, DVI, VGA, HDMI
DisplayPort, 3G-SDI, HD-SDI, SD-SDI
Video, Audio, USB, RS232
Digital Signage
Scaler
Konverter
Glasfaser Übertragungssysteme
Monitorhalterungen
|
| Kompetenzbereiche |
DI(FH) Günther Lugauer
Rack Monitoring
Serverraum Überwachung
Temperaturüberwachung
SNMP, E-Mail und SMS
Remote I/O
Wireless Communication
GSM GPRS EDGE UMTS HSDPA HSUPA HSPA+ VPN Router
Industrielle Fernwartung
SNMP Energiemonitoring
RS232 / RS422 / RS485 / USB over IP
Medienkonverter
Industrielle Netzwerkswitches
Audio over IP
Ing. Gregor Schuller
USV Anlagen - UPS Systems
USV Batterien / Akkus
USV Service und Software
Serverschränke, Netzwerkschränke
Remote Power Management
Zutrittssysteme
CATx und LWL Kabel
Passive Netzwerktechnik
Jürgen Binder
VGA, DVI, HDMI, DisplayPort
KVM Switches
KVM Extender
KVM over IP
DVI KVM Extender
USB 2.0 Extender
Matrix Switches
Digital Signage
Konverter
|
| Wir empfehlen |
Hörbücher von Robert Betz
zu den Themen
ERFOLG und FÜLLE
|
|
