CrystalView DVI Mini Rose electronics Mini DVI KVM Extender CATx

BellEquip GmbH
 
CrystalView DVI Mini
Mini KVM DVI Extender über CATx
 
CrystalView DVI Mini
• Preisliste zusenden • Anfrage
 

CrystalView DVI Mini Mini DVI KVM Extender

Supports video resolutions up to 1920 x 1200 @ 60Hz
Extends single-link DVI-D video up to 165' over STP CAT5e or STP CAT6 cable (165' @ 1280x1024 or lower)
A vailable in single or dual head models
Selectable DDC information (internal pre-defined or from the remote monitor)
USB – HID support

FEATURES AND BENEFITS

# Single or dual head models available
# Supports all operating systems and computers with a DVI-D graphic interface (uncompressed)
# Video resolutions up to:
1920 x 1200 @ 130 feet (40 meters)
1920 x 1080 @ 130 feet (40 meters)
1600 x 1200 @ 130 feet (40 meters)
1280 x 1024 @ 165 feet (50 meters)
# No video quality degradation at all resolutions
# Use the internal EDID configuration or read the information directly from the remote monitor
# Supports USB keyboards, mice and other HID devices like touch screens and graphic tablets.
# Selectable CATx cable length settings provides for the best, clearest image
# Automatic or manual resolution configuration

The Rose advantages:

The CrystalView Mini DVI is the ideal product to extend a keyboard, mouse and DVI monitor from the connected computer. It’s small in size but produces excellent quality DVI-D video with no degradation at all resolutions. All models can extend the distance to the remote monitor up to 165 feet (50m).

The CrystalView Mini DVI supports DVI-D graphic cards with resolutions up to 1920 x 1200 @ 60Hz. Models are available for single head and dual head video.

Simple adjustments can be made using the dip switches located on the transmitter and receiver. The dip switches on the receiver can be set, if needed, to specify the CATx cable length used between the transmitter and receiver. These settings should only be modified if the CATx cable length is very short or the image quality not satisfactory. The default setting is for cable lengths greater than approximately 100 feet (30 meters). The dip switches on the transmitter can be set, if needed, to specify the monitor resolution. In most cases, the cable length and monitor resolution default settings are suitable for all conditions and no adjustments are needed.

The CrystalView Mini DVI extender supports a wide range of USB HID devices. All standard 2 button, 3 button, and wheel mice and all standard keyboards are supported. Other HID devices such as touch-screens, graphic tablets, barcode readers or similar HID devices may function properly but are not guaranteed. The CrystalView Mini DVI only supports a maximum of two USB HID devices.

 
CrystalView DVI Mini
 
Product Part Number Description

CRK-M1DTXUD1D
Single-Link, Single-Head DVI Video and USB-HID. 1 Remote user with DVI/USB interface.

CRK-M1DTXUD2D
Single-Link, Dual-Head DVI Video and USB-HID. 1 Remote user with DVI/USB interface.

 
BellEquip GmbH • Franz Eigl-Straße 8 • 3910 Zwettl • Österreich / Austria • Tel.: +43 (0)2822 33 33 990 • Fax: +43 (0)2822 33 33 995
Internet: www.bellequip.at • E-Mail: info[a]bellequip.at