DVI CAT-5 MS Extreme Extender von Gefen: DVI Verlängerung über CAT5 bis 100 Meter (HDTV, HDMI) - EXT-DVI-CAT5-MS

BellEquip GmbH

DVI CAT-5 MS Extreme Extender von Gefen bei BelleEquip - DVI Extender über CAT5 - EXT-DVI-CAT5-MS

Verlängerung von DVI über 100 Meter (Quelle HDTV, DVI, HDMI)

 
EXT-DVI-CAT5-MS
• Preisliste zusenden • Anfrage
 
Extends DVI up to 300 feet over two CAT-5 cables.

The DVI CAT-5 MS Extreme extends your DVI display up to 300 feet away from your DVI or HDMI™ source using cost effective CAT-5 cables.

How It Works

The DVI CAT-5 Extreme sender unit sits next to your computer, DVD player or any set-top box. The cable supplied with the DVI CAT-5 MS Extreme connects your DVI source to the sender. The DVI CAT-5 MS Extreme receiver sits next to your DVI display - up to 300 feet away. The display plugs into the back of the DVI CAT-5 MS Extreme receiver. Two CAT-5e cables connect the sender and the receiver units to each other.

Note: The DVI CAT-5 MS Extreme is fully HDCP compliant.

D VI, HDCP & HDMI Defined

Features:

* Improved compensation for cable skew
* Uses CAT-5e cable for DDC and control signals
* Extends any DVI (digital visual interface) compliant device up to 300 feet from the computer
* 300 ft extension at 1280x1024/1080i
* 150 ft extension at 1920x1200/1080p
* Saves space on your desktop and increases productivity
* Eliminates computer noise where you work
* Supports VESA Standard resolutions and HDTV resolution
* Supports DDWG standard for DVI compliant monitors
* Installs in minutes

Specifications:

* Video Amplifier Bandwidth: 165 MHz
* Single Link Range: 1080P/1920 x 1200
* Input Video Signal: 1.2 volts p-p
* Input DDC Signal: 5 volts p-p (TTL)
* Input/Output DVI Connector: DVI-I (29 pin) female (Digital Only)
* Link Connector: RJ-45
* Power Supply: 5V DC
* Power Consumption: 20 Watts (max)
* Dimensions: 3.4"D x 3.25"W x 1.25"H
* Shipping Weight: 3 Lbs.

Package Includes:

* One DVI CAT-5 Extreme-S
* One DVI CAT-5 MS Extreme-R
* One 6 foot DVI cable
* Two 5V Power Supplies
* User's Manual
 
BellEquip GmbH • Franz Eigl-Straße 8 • 3910 Zwettl • Österreich / Austria • Tel.: +43 (0)2822 33 33 990 • Fax: +43 (0)2822 33 33 995
Internet: www.bellequip.at • E-Mail: info[a]bellequip.at