|
|
|
PD Trigger SNMP Monitoring Software für Poseidon und Damocles |
| |
|
|
• Preisliste zusenden
• Anfrage
|
| |
PD Trigger is a Windows application that receives alarms from Poseidon and Damocles units, and performs simple actions such as displaying a warning message, sending a SMS, or activating a remote output. Alarm alerts are received via SNMP traps. Alarm types are evaluated by conditions and appropriate actions are performed.
PD Trigger can, to a limited extent, replace monitoring (NMS) or control (SCADA) systems.
Poseidon and Damocles units send alarm alerts (e.g. when a temperature is exceeded) via e-mail or SNMP trap. PD Trigger receives and reacts to SNMP traps (rapidly delivered UDP packets).
* A system of rules allows to configure a reaction to a precisely defined stimulus or alarm.
* Works with Poseidon and Damocles (over SNMP).
* Runs as a NT service, supports Windows 2000/XP/Vista and 2000/2003 Server.
* Various reactions to alarms: Warning pop-ups, playing an audio file, sending a text message (SMS), activating a remote output, launching a specified application by NT service / GUI application.
* Password-protected configuration interface.
Main features
* Compatibility: Supports all Poseidon and Damocles products (SNMP required)
* Rules: Simple management and creation of rules using graphical wizards.
o Operations can be combined by specifying multiple rules.
o Independent rules executed when the remote device is started.
o Independent rules executed when PD Trigger is started.
o Supports multiple device at once – alarm inputs are resolved at the sensor/input name level.
* Actions: Examples of reactions that can be invoked based on a condition:
o Displaying a warning pop-up window (together with other actions if needed).
o Playing a WAV file with the system media player.
o Launching an external application when a user is logged in.
o Launching an external application with no users logged in.
o Sending a SMS (short text message) using an external modem connected to the PC, with optional logging.
o Activating outputs of Poseidon or Damocles units over the Ethernet.
* Operating systems: Windows 2000/XP/Vista/2000 Server/2003 Server.
o Client/server application to enable stand-alone operation in Windows servers.
o NT service mode allows autonomous operation.
o Independent system log.
* Simple installation: Automatic configuration of the default firewall in Windows XP SP2/2003 Server/Vista.
* Security: Password-protected configuration interface.
System of rules
PD Trigger executes user-specified actions based on a set of rules that define under which conditions should the operations be performed. Individual rules can be combined.
Parameters of rules:
* Name – Simplifies rule management by users.
* Condition – Defines the condition on which to act: device powered up (specify the device IP address), input or sensor in alarm (specify the input/sensor name). Furthermore, the condition specifies whether the rule should execute upon alarm activation, alarm deactivation, or both.
* Action – Defines what should happen if the filter condition is matched (display a warning pop-up, send a SMS, etc).
Each action requires a separate rule, except for the pop-up window that can be displayed within another action.
Initialization rules
PD Trigger supports special rules executed once in the following situations:
* Rule activated when the device is powered up.
* Rule activated when PD Trigger is started.
Both of these rules can be used to set the initial values of remote outputs. Rules activated at device power-up can be used, for instance, to display warnings about the need to check the status of the monitored environment, and so on. |
| |
|
|
