HWg-SH3: IP-based Rack Access Control System with RFID & SNMP
A rack access control system (ACS) with RFID and SNMP interface. User database configurable over the Web. Can be used as a stand-alone card access system with web management (Offline) or as a central cabinet access system (Online). Remote monitoring over Email and SNMP.
HWg-SH3 is an autonomous cabinet access control system (ACS) with RFID. The database of authorized tags/cards can be managed remotely over the Web.
HWg-SH3 uses a local RFID reader and controls one or two swing handles (front and rear doors of a cabinet).
The unit can be used as a stand-alone offline solution independent from any software. HWg-SH3 can be also used in online mode with access authorization against the HWg-DCD application.
* Offline mode (no software required)
Door can be opened with: RFID card, DIN Key, WEB
* Online mode (central software required)
Door can be opened with: RFID card, DIN Key, WEB, SMS code from any telephone, Admin interface of the software (HWg-DCD for example).
* You can open the door over the Web
* RFID tag database can be edited over the Web
* A door contact for detecting the state of the door (open/closed) can be connected
* Uses an external RFID reader (127 kHz or 13.5 MHz support)
* Detects entry with a key / forced entry / disconnected cable
Typical applications
HWg-SH3 is typically used in a remote cabinet, rack or box, which may be accessed by a few authorized users only. Authorized users can be changed remotely over the Web interface. |
Features:
* Ethernet: RJ45 (10/100 Mbps)
* WEB: Built-in Web server
* Protocols: SNMP, Syslog, SMTP
* Electronic Swing Handles: Two HWg-SH1 (Southco H3-EM - Electronic Locking Swinghandle) supported.
* Inputs: 2 digital inputs for door contacts (front/back door)
* RFID reader: RS-232 / Wiegand for connecting a RFID reader
* Physical features: Rack mount (on the side), dimensions: 96 x 78 x 30 [mm]
* LAN interface: Secure communication with the HWg-DCD application running on a central server
* Supported software
o HWg-DCD: Access control (remote control of rack doors) for data centers
o HWg SysLog logger: SysLog messages collector
o >> Third-party SNMP software
(HP OpenView, IBM Tivoli, Nagios, Zabbix, Cacti, Monitor one, The Dude, Paessler IPCheck, Ipswitch WhatsUp, Axence nVision, CBR little:eye, LoriotPro, GFi NSM, SNMPc 7, CA NSM, ActiveXperts NM, Intellipool NM, MSC Operations Manager 2007) |
