KD-VPHD3 - Digital Video Processor, Video/Audio Switcher und Universal Distribution Center

BellEquip GmbH
 
KD-VPHD3 - Digital Video Processor, Video/Audio Switcher und Universal Distribution Center
KD-VPHD3
KD-VPHD3

KD-VPHD3 is a Digital Video Processor, Video/Audio Switcher and Universal “Distribution Center”. It is capable of scaling and deinterlacing virtually any source/input resolution and outputting to virtually any high definition display up to 1080p.

Key Benefits:

Universal “Distribution Center” for any HDMI or Component Video equipped display including flat panel or projector displays

Up-converts SD (480i/P, 576i/P), HD (720P, 1080i), XGA (1024x768P) and WXGA (1280x768P, 1366x768P) resolutions of analog and digital video inputs to a single digital HDMI or Component/RGBHV output with available resolutions up to 1080p4

Down converts XGA (1024x768P), WXGA (1280x768P, 1366x768P) and HDTV (1080i, 720P) resolutions to SD (480i/P, 576i/P)4

Individual customization and memorization of each input for all key video parameters: Aspect Ratio, Brightness, Contrast, Hue, Edge Enhancement, Image Position, etc .

Accommodates a wide variety of digital and analog video input formats and connectors, including HDMI, Component, VGA/RGBHV, Composite and S-Video4

Supports 3 output video formats (RGBHV, HDMI/DVI, Component) and 3 audio output formats (Toslink digital, Coaxial digital, analog L/R)4

KD-VPHD3’s digital video processor with deinterlacing, scaling and switching is the best way to match interlaced and progressive scan video from any source to the native resolution of your analog or digital display

Serial IR, Optical IR, RS-232, Front Panel Control with LCD, Discrete Remote Codes

Incorporates 12 Key Digital® Exclusive Technologies

Key Solutions


he perfect solution for HTPC (Home Theater PC) setups with multiple sources
Allows virtually any computer to display images on standard Plasma, LCD and projector displays
Becomes distribution center switching up to 3 Composite, 2 S-Video, 3 Component, 1 VGA and 2 HDMI inputs and scaling into one HDMI output and/or one Component/RGBHV output
Can assign any audio input to any video input with the ability to convert any audio input format to any audio output format (analog or digital)
Provides one cable solution to the display and/or A/V receiver
Both Analog and HDMI Video outputs can be active simultaneously if no HDCP is present
State-of-the-art picture quality from virtually any source
Control systems supported via RS-232/IR: AMX (supports AMX DDDP – Dynamic Device Discovery Protocol), Crestron, Control4, RTI, Universal, Xantech and more
 
KD-VPHD3
 
 
 
BellEquip GmbH • Franz Eigl-Straße 8 • 3910 Zwettl • Österreich / Austria • Tel.: +43 (0)2822 33 33 990 • Fax: +43 (0)2822 33 33 995
Internet: www.bellequip.at • E-Mail: info[a]bellequip.atLink