UltraMatrix AV DVI - DVI Video und Audio Matrix Switch

DVI Video und Audio Matrix Switch

DVI Matrix Switch

DVI-D matrix switch (no-blocking, single link)
4x4, 8X8 and 16X16
Supports video resolutions up to 1920 x 1200
Supports DVI operation at a maximum TMDS rate of 2 x 1.65 Gb/sec over a transmission distance of 30'

Features and Benefits:

# Independently display the contents of up to sixteen computers on up to sixteen DVI-D displays
# Non-blocking, single-link DVI-D matrix switch
# Max TMDS rate of 2 x 1.65 Gb/sec
# Resolutions up to 1920 x 1200
# Unique “Learn Mode” determines the specs for any output monitor. Once learned, the monitors do not have to be connected for the computers to boot
# Switch a video source to any output monitor using the front panel push buttons or sending serial commands to the unit
# Intuitive RS232 software control (RoseControl) makes switching, routing, and controlling the video displays quick and easy
# Optional IR, USB, and TCP/IP control
# DVI-D video transmission distance up to 30 feet
# Set-up multimedia presentations where information is displayed from several computers
# Automatic receiver equalization
# Rack-mountable chassis

The Rose advantages.....

The UltraMatrix AV DVI-D matrix switch is the perfect addition to new or existing installations that need to display 1 to 16 video sources to 1 to 16 remote DVI-D displays. Pick one video source and display it on 1, 2 or all monitors.

Easy front panel selection of the video source to displayed on each remote monitor. Just push a button and select the source, then select the destination port. The front panel display shows which computers are connected to the displays.

Selection can also be performed by using the provided RoseControl software that sends switching command to the unit. With one click on the cross-point, that computer’s video is instantly switched to the selected DVI-D monitor. These commands are sent using the RoseControl software installed on a computer or laptop and connected to the RS232 port on the unit.