Digi One® IA - Industrieller Geräteserver mit RS-232/422/485

Der Digi One IA von Digi ist ein industrieller Geräteserver.
Der Digi One IA von Digi ist ein industrieller Geräteserver.
Die seriellen Geräteserver der Digi One IA Serie sind ausgestattet mit Modbus Serial zu Modbus/TCP Funktion, einem RS-232/422/485 Port, TCP/UDP Socket Service, 2kV Überspannungsschutz und Betriebstemperaturen von 0°C bis 60°C.

zum Merkzettel hinzufügen

Datenblatt zusenden

Digi One® IA - Ethernet Enable Any Industrial Service Device

The Digi One IA serial server provides reliable, cost-effective network connectivity for virtually any serial device. This unobtrusive and easy-to-use device server delivers serial-to-Ethernet connectivity to Programmable Logic Controllers (PLCs), Remote Terminal Units (RTUs), process and quality equipment, bar-code readers and other industrial devices.

Digi One IA supports most industrial automation protocols through TCP/UDP connections, serial bridging or COM port redirection using Digi’s patented RealPort® software. RealPort enables existing applications to communicate, without modification, with serial devices over the Ethernet. By creating a Modbus bridge, multiple Modbus/TCP masters can share Modbus serial slaves, or Modbus serial masters can access Modbus/TCP slaves.

Digi One IA serial servers are easy to install locally or remotely. The IP address can be configured using DHCP, ARP-Ping or Setup, an application included with the installation CD that automatically detects Digi One devices on the network. Using the web interface, users can configure advanced functions into their application.

ManagementHTTP configuration, Digi Port Authority – Remote management diagnostics and auto-discovery tool
ProtocolsTelnet, Reverse Telnet and extended Telnet RFC 2217; TCP/UDP Socket Services; UDP, support 32 concurrent socket connections; DHCP/RARP, ARP-Ping; Modbus ASCII/RTU to Modbus TCP conversion; Modbus Ethernet-to-Serial Bridge Function supporting Modbus/TCP, Modbus/UDP, Modbus/RTU, Modbus/ASCII; Modbus bridge supports TCP and UDP Encapsulation of Modbus/RTU, Modbus/ASCII
SoftwarePatented RealPort for COM/TTY ports
Operating SystemsAIX, HP-UX, Linux®, SCO® OpenServer™ 5, SCO® OpenServer™ 6, Solaris™ Intel, Solaris™ SPARC, Windows XP®, Windows Server® 2003, Windows Server® 2008, Windows Vista®
Status LEDsSerial signals, Power, Ethernet, Diagnostics
Dimensions (L x W x D)4.70 in x 0.90 in x 4.0 in (12.00 cm x 2.30 cm x 10.10 cm)
Weight2.25 oz (64.00 g)
OtherFull modem and hardware flow control, Flash upgradeable firmware, 35 mm DIN rail mounting
Serial Ports1 RS-232/422/485 (switch selectable)
Serial ConnectorDB-9M or screw terminal connectors
Serial ThroughputUp to 230 Kbps
Ethernet Physical Layer10/100Base-T
Power Requirements
Power Input9-30 VDC @ .5 Amps max
Power ConnectorScrew terminal block power jack for external supply
Surge Protection2 kV isolation between power supply and serial ground product
Operating Temperature0º C to 60º C (32º F to 140º F)
Relative Humidity5% to 90% (non-condensing)
Ethernet Isolation1500 VAC min per IEEE 802.3/ANSI X3.263
Serial Port Protection (ESD)+15 kV air GAP and +8 Kv contact discharge per IEC 1000-4-2
Regulatory Approvals
SafetyUL 60950, UL1604 (Class 1 Div 2), EN60950, CAN/CSA C22.2 No.60950
Emissions/ImmunityFCC Part 15 Subpart B (Class A), EN55024, EN55022 (Class A), EN61000-6-2
Digi One IA 70001862