IMCV-Giga-FiberLinX-III Serie - Optisches Demarcation Modul mit 10/100/1000 Mbps

Der IMCV Giga FiberLinX III von B+B SmartWorx ist ein Demarcation Module.
Der IMCV Giga FiberLinX III von B+B SmartWorx ist ein Demarcation Module.
Die optischen Demarcation Module der IMCV-Giga-FiberLinX-III Serie von B+B SmartWorx sind ausgestattet mit 3 Operationsmodi, optionalen SFP Ports, Kompatibilität zum IMCV-Giga-FiberLinX-II und Unterstützt bis zu 64 VLANs.

zum Merkzettel hinzufügen

Datenblatt zusenden

IMCV-Giga-FiberLinX III Series -  10/100/1000 Mbps Managed Optical Demarcation Module

The iMcV-Giga-FiberLinX-III intelligent media converter connects a Host/Remote Ethernet network over a fiber optic or CAT 5 copper connection. It combines media conversion with an advanced-feature set for network management and troubleshooting, including OAM (Operations, Administration and Maintenance), Extra-Tagging and EtherType control functionality. With the iMcV-Giga-FiberLinX-III, administrators can observe the end-points over the fiber segment between them, as a single management entity. Bandwidth scalability and support for MIBs II makes this modular device a versatile gigabit solution, now available as a single wide module.

iMcV-Giga-FiberLinX-III allows for remote configuration and alerts administrators to any potential problems on the long-haul fiber run, provides vital information on link condition and reports data traffic statistics.. In addition to the iMcV-Giga-FiberLinX-III's support for Host/Remote environments, the product also has built-in support for the Unified Management Agent (UMA). With UMA, the central location can manage all Host/Remote pairs installed in an iMediaChassis with the single IP address of the chassis.

Optional single- or dual-SFP port versions or all copper (RJ-45) port versions are also available for complete network flexibility. The iMcVGiga-- FiberLinX-III SFP requires one or two MSA-compliant fiber optic SFP modules (sold separately) to operate. [Copper SFPs are not supported.]



  • Preserves complete end-to-end fiber connection integrity
  • Supports Extra Tagging (Q-in-Q)
  • Supports 802.3ah OAM (Operation, Administration & Management)
  • Bi-directional bandwidth control
  • Read/write IEEE 802.1Q VLAN-tags
  • QoS: IEEE 802.1p-based packet prioritization (2 queues [high/low] with 8 levels of priority)
  • Layer 2 packet switching, store and forward operation
  • Forwarding rate: 14,881 pps for 10 Mbps; 148,810 pps for 100 Mbps; 1,488,100 pps for 1000 Mbps
  • Features Auto Negotiation and Selective Advertising
  • Supports up to 64 VLANs operation
  • MTU: Supports over-sized (Jumbo) packets up to 10240 bytes


  • Password Control
  • Multiple Access Levels: User Assigned Accounts & Access Levels


  • SNMP V1 and V2c compatible
  • Includes GUI-based iView² software for remote management (WIN and WebServer versions)
  • Monitors far-end (remote) status without a physical presence or separate connection
  • IEEE 802.3x Flow Control
  • Includes DHCP and TFTP clients
  • Supports Telnet
  • Includes loopback test modes (MAC swap)
  • Includes Link Fault Pass Through
  • Supports Unified Management Agent (UMA)
  • Includes status LEDs

Ethernet Protocols Supported

  • IEEE 802.3ab 1000Base-T twisted pair
  • IEEE 802.3z 1000Base-X fiber
  • IEEE 802.3x Flow Control
  • IEEE 802.3i 10Base-T twisted pair
  • IEEE 802.3u 100Base-TX twisted pair


  • Dimensions Standard single-slot chassis module
  • Shipping Weight 0.3 lbs (0.136078 kg)

Power Consumption

  • 731mA at 5V


  • Operating Temperature: +32° to +122° F (0° to +50° C)
  • Storage Temperature: -13° to +158° F (-25° to +70° C)
  • Humidity: 5% - 95% (non-condensing)

Regulatory Aprovals

  • FCC Class A
  • UL/cUL, CSA, CE
856-14201 iMcV-Giga-FiberLinX-III, TX/SFP (uses one SFP/1250-ED SFPs)
856-14220 iMcV-Giga-FiberLinX-III, TX/SSLX-SM1310-SC (1550 rcv), 15 km
856-14221 iMcV-Giga-FiberLinX-III, TX/SSLX-SM1550-SC (1310 rcv), 15 km