Elinx EIRP600 Serie - Managed PoE Gigabit Ethernet Switch Series
Power over Ethernet (PoE) means that power is transmitted over the Ethernet cable along with the data lines. Each PoE switch has a set of ports that is classified as power source equipment (PSE). Since the ports can power IEEE 802.3af compliant powered devices (PD), the need for a separate power line to be run to each end device is eliminated.
The EIRP610-2SFP-T is a 10 Port Managed Industrial PoE Gigabit Ethernet Switch. In addition to 8 PoE copper RJ-45 ports, it has 2 RJ-45/SFP Combo ports to accommodate Gigabit Ethernet.
Small Form-factor Pluggable (SFP) Port:
The SFP Ports provide flexibility when planning a network. Modules are available in multiple fiber formats. If an SFP module is not inserted, the associated combo port can be used with standard RJ-45 copper.
The switch includes a switch controller that automatically senses transmission speed (10/100/1000 Mbps). The RJ-45 interface also auto-detects MDI or MDI-X, eliminating the requirement for a crossover cable. Each port is buffered and supports store-and-forward protocol.
Power Over Ethernet (PoE)
The eight 10/100 ports are classified as power sourcing equipment (PSE). These ports can be used to power IEEE 802.3af compliant powered devices (PD), eliminating the need for a separate power supply for each device.
Dual Power Input
To reduce the risk of power failure, the switch has two 48 VDC power inputs.