Connect ME® - Sicheres Netzwerk Geräteservermodul

Der Connect ME von Digi ist ein System-on-Module.
Der Connect ME von Digi ist ein System-on-Module.
Der Digi Connect ME® ist ein sicheres Netzwerk Geräteservermodul mit einem integriertem 10/100 Mbit Ethernet Interface, serieller High-Speed Schnittstelle (UART) und Enterprise-grade Netzwerksicherheit.

zum Merkzettel hinzufügen


Digi Connect ME® - Secure Network Device Server Module

The Digi Connect ME is a secure device server module that delivers complete and versatile embedded IPv6-ready network connectivity and strong standards-based encryption services such as SSL/SSH. Built on leading Digi 32-bit NET+ARM technology, the Digi Connect ME is cost effective and easy to use in existing and new product designs, while powerful enough to meet future product performance needs. The connector-style module is pin-compatible and interchangeable with the Digi Connect® Wi-ME, providing a direct migration path to a wireless solution without the traditional complexities of hardware and software integration work.

The Digi Connect ME family features the development and operational benefits of Digi Device Cloud. This secure, highly-scalable platform seamlessly ties enterprise applications and remote devices together.

Device Cloud empowers IT, network operations and customer support organizations to conquer the challenges of managing equipment in their device networks. Network managers can remotely configure, upgrade, monitor and troubleshoot remote devices, and create applications that improve productivity, speed and efficiency.

Hardware
Processor Type32-bit Digi NS7520 processor
ARM CoreARM7TDMI
Processor Speed55 MHz
Memory Base Population2/4 MB NOR flash, 8 MB SDRAM
Pins/Form FactorRJ-45 connector style with 20-pin micro pin header (Samtec FTS-110-01-F-DV-TR)
High-Speed TTL Serial InterfaceUp to 230 Kbps data rate Full signal support for TXD, RXD, RTS, CTS, DTR, DSR and DCD Hardware/Software flow control
GPIOUp to 10 shared with 1 external IRQ
On-module Power Supervisor
JTAG InterfaceNET+OS development modules only (P/N DC-ME-01T-JT, DC-ME4-01T-JT)
Wave-Solderable DesignNo clean flux process
Dimensions (L x W x H)1.445 in (36.7 mm) x 0.75 in (19.05 mm) x 0.854 in (21.69 mm)
Network Interface
StandardIEEE 802.3
Physical Layer10/100Base-T
Data Rate10/100 Mbps (auto-sensing)
ModeFull- or half-duplex (auto-sensing)
ConnectorRJ-45
Integrated Ethernet MAC/PHY
PoE Power Pass-Through
Environmental
Operating Temperature-40° C to +85° C (-40° F to +185° F)
Storage Temperature-50° C to +125° C (-58° F to +257° F)
Relative Humidity5% to 90% (non-condensing)
Altitude12,000 feet (3,658 meters)
Power Requirements (3.3V)
Maximum270 mA (891 mW)
Approvals
Regulatory ApprovalsFCC Part 15 Class B, EN 55022 Class B, EN 61000-3-2 and EN 61000-3-3, ICES-003 Class B, VCCI Class II, AS 3548, FCC Part 15 Sub C Section 15.247, IC RSS-210 Issue 5 Section 6.2.2(o), EN 300 328, EN 301 489-17, UL 60950-1, EN 60950 (EU), CSA C22.2, No. 60950, EN 55024,
Digi JumpStart Kits
Digi Connect ME Digi JumpStart Kit DC-ME-NET
Integration Kits
Digi Connect ME Integration Kit DC-ME-KT
Modules with Plug-and-Play Firmware
Digi Connect ME w/2 MB Flash DC-ME-01T-S
Digi Connect ME w/4 MB Flash DC-ME4-01T-S
Digi Connect ME w/2 MB Flash, 802.3af compliant power pass-t DC-ME-01T-PS
Modules for NET+OS
Digi Connect ME w/2 MB Flash DC-ME-01T-PC
Digi Connect ME w/4 MB Flash DC-ME4-01T-C