Digi One® IAP Family - Robuster Geräteserver für extreme Temperaturen

Die Digi One IAP Family von Digi sind Industrielle Geraeteserver.
Die Digi One IAP Family von Digi sind Industrielle Geraeteserver.
Die robusten Geräteserver der Digi One IAP Family sind ausgestattet mit einem seriellen RS-232/422/485 Port, 10/100Base-T Ethernet, Betriebstemperaturen von -35°C bis 75°C (Haz Modell) und 2kV Überspannungsschutz.

zum Merkzettel hinzufügen

Datenblatt zusenden


Digi One IAP Family - Hardened, Rugged Serial Servers For Extended Temps

Digi One IAP and Digi One IAP Haz serial servers combine reliable serial-to-Ethernet connectivity with protocol conversion and interoperability. Users can IP enable a broad range of serial devices, as well as link two industrial devices. It is ideal for device management and monitoring applications requiring specific industry protocol support as well as harsh environments where exposure to extreme temperatures, volatile liquids and gases is common. The Haz model includes a conformal coated PCB and operating temperature range of -35° C to +74° C.

Serial server functionality built into the Digi One IAP family allows virtually any serial device to be connected to a TCP/IP network. Applications may communicate with the serial device using TCP/UDP or Digi’s patented RealPort® COM port redirector for remote native COM port access. RealPort enables existing applications to communicate, without modification, with serial devices over the Ethernet. By creating a Modbus bridge multiple Modbus/TCP masters can share Modbus serial slaves or Modbus serial Masters can access Modbus/TCP slaves.

The Digi One IAP family supports a variety of serial (DF1, Modbus, ASCII) and Ethernet (ModbusTCP, AB/Ethernet, Ethernet/IP) protocols, allowing users to bridge serial and Ethernet devices, or both. Multi-master access allows multiple masters to communicate with a single slave across protocols. Digi One IAP converts ASCII data from serial devices to Ethernet protocols. An additional serial port can act as a pass-through port, allowing local devices to communicate with a slave unit without disrupting the serial-to-Ethernet connection.

Features
ManagementHTTP configuration, Digi Port Authority–Remote management diagnostics and auto-discovery tool, SNMP (read/write)
ProtocolsTelnet, Reverse Telnet, RFC2217, TCP/UDP Socket Services, PPP, DHCP/RARP, ARP-Ping, Static IP for IP address assignment, Support for 64 concurrent socket connections, ASCII, DF1, Modbus RTU/ASCII, Modbus/TCP, EtherNet/IP, Allen-Bradley Ethernet
SoftwarePatented RealPort for COM/TTY ports
SecuritySSHv2, SSL, TLS, HTTPS
Operating SystemsAIX, HP-UX, Linux®, SCO® OpenServer™ 5, SCO® OpenServer™ 6, Solaris™ Intel, Solaris™ SPARC, Windows XP®, Windows Server® 2003, Windows Server® 2008, Windows Vista®, Windows 7
Status LEDsSerial signals, Power, Ethernet and diagnostics
Dimensions (L x W x D)4.70 in x 0.90 in x 4.0 in (12.00 cm x 2.30 cm x 10.10 cm)
Weight2.5 oz (64.0 g)
Digi One IAP
Powered Ethernet802.3af (midspan and endspan) support and fail-over capability when used with 9-30 VDC input
Operating Temperature0° C to +60° C (32° F to +140° F)
OtherFull modem and hardware flow control, Flash upgradeable firmware, 6 ms serial over Ethernet latency, 35 mm DIN rail mounting
Digi One IAP Haz
Powered EthernetN/A
Operating Temperature-35° C to +74° C (-31° F to +165° F)
OtherConformal coated PCB, Full modem and hardware flow control, Flash upgradeable firmware, 6 ms serial over Ethernet latency, 35 mm DIN rail mounting
Interfaces
Serial Ports1 RS-232/422/485 (switch selectable)
Serial ConnectorScrew terminal connector or DB-9M; DB-9M can act as a second direct RS-232 port or can be used as a pass-through port for the screw terminal connector
Serial ThroughputUp to 230 Kbps
Ethernet Physical Layer10/100Base-T
Power Requirements
Power Input9-30 VDC @ 0.5Amps max
Power SupplyRemovable screw terminal for power (power supply not included)
Surge Protection2 kV isolation between power supply and serial ground product
Environmental
Relative Humidity5% to 90% (non-condensing)
Ethernet Isolation1500 VAC min per IEEE 802.3/ANSI X3.263
Serial Port Protection (ESD)+15 kV air GAP and +8 Kv contact discharge per IEC 1000-4-2
Regulatory Approvals
SafetyUL 1950, UL 1604 (Class 1, Div. 2), CSA 22.2 No 950, EN60950
Emissions/ImmunityFCC Part 15 (Class A), ICES-003 (Class A), CE, AS3548, EN6100-6-2 + EN55024, EN55022 (Class A)
Modelle
Digi One IAP 70001777
Digi One IAP Haz 70002326